3 Bay: 2 Static + 1 Movable Glide-A-Side Sliding Cabinet Space Saving Sliding Filing Cabinet, Two Rows Deep | Products | IGREEN Office Furniture

Glide-A-Side Sliding Cabinet

Space Saving Sliding Filing Cabinet, Two Rows Deep

Glide-A-Side sliding filing cabinet: two rows of steel shelving in one footprint. The front row slides sideways on a solid steel track to reach the fixed back row, so no aisle is needed. Two sizes, W 1830 or W 2745 mm, 856 mm deep. 350 kg per bay, 65 kg UDL per shelf. Cold rolled steel, powder coated. Supplied and installed in Malaysia by Igreen Office Furniture Sdn. Bhd.
Select your type:
Select your colour:
Put your quantity:

Key Features

Arrange a quotation for the Glide-A-Side Sliding Cabinet on WhatsApp

Two rows in one footprint. A static row stands against the wall and a movable row stands directly in front of it. You store two rows of files in the floor space of one, with no aisle between them.

Slides sideways, left and right. The front bays run on a solid steel track with special bearings. Slide a front bay aside and the bay behind it is open.

Smooth and stable movement. The bay moves smoothly even when it is fully loaded.

Suitable where room space is very limited. It needs only a wall. It suits a corridor, an alcove or the back of a department, where a compactor on floor tracks will not fit.

Office design outlook. Powder coated steel in a clean office finish, so it can blend in with the office area and does not need its own filing room.

350 kg per bay. Each bay base holds 350 kg, and each shelf carries 65 kg UDL as standard.

Good to know

Which size to choose. There are two standard sizes: 2 static plus 1 movable bay (W 1830 mm) and 3 static plus 2 movable bays (W 2745 mm). Both are 856 mm deep and 2186 mm high.

Put daily files in front. Keep the files you use every day on the front row and the less used files on the back row, so you slide a bay less often.

How many arch files it holds. As a guide, one 915 mm bay takes about 11 three inch arch files on each of its 5 tiers, about 55 a bay: about 165 files for the 3-bay size and 275 for the 5-bay size.

Need more than this. For a whole filing room, see the mechanical mobile compactor or the hand push mobile compactor.

Care & Maintanances

Wipe, do not wash. Wipe the powder coated steel clean with a mild soapy solution, then wipe dry with a clean cloth.

Keep the track clear. Keep the floor platform and track free of paper clips and dust so the front bays keep sliding smoothly.

Load shelves evenly. The shelf rating is a uniformly distributed load. Spread files across the full width of the shelf.

Slide by the handle. Move the front bay by its handle post, with nothing left standing on the platform in its path.

Product Informations

Specifications

Specification Glide-A-Side Sliding Cabinet
Operation Front row slides sideways by hand on a floor track; back row is static
Size, 2 static + 1 movable W 1830 × D 856 × H 2186 mm
Size, 3 static + 2 movable W 2745 × D 856 × H 2186 mm
Bay width 915 mm
Tiers per bay 5 tiers, as shown
Material Cold rolled carbon steel (JIS G3141 SPCC-SD) with enamel finish
Pre-treatment 7 stage pre-treatment process
Powder coating 50 to 80 micron, baked above 200 °C
Body thickness 0.8 mm steel after powder coating
Base and track 1.2 mm base; solid steel track with special bearing
Base loading 350 kg per bay
Shelf loading 65 kg UDL per shelf standard; up to 100 kg UDL on request
Colour Light grey, as shown
Arch file capacity (guide) About 55 three inch arch files per bay
Warranty 10 years on manufacturing defect

How it saves space

Each bay is 915 mm wide and 406 mm deep. On a 2745 mm wall, standard shelving fits 3 bays in one row. The Glide-A-Side fits 5 bays on the same wall: 3 static bays at the back and 2 movable bays in front, 856 mm deep in total, with no aisle between the rows. That is 67% more filing on the same wall. Put the other way, 5 bays in a single row would need 4575 mm of wall; the Glide-A-Side needs 2745 mm, which is 40% less.

Sizes and combinations

The front row always has one bay fewer than the back row, so there is a space to slide into. Standard sizes are 2 static + 1 movable (3 bays, W 1830 mm) and 3 static + 2 movable (5 bays, W 2745 mm). A longer 4 static + 3 movable arrangement (7 bays, W 3660 mm) is also drawn for this system. Every size is 856 mm deep and 2186 mm high. Tell us your wall length and we will advise the combination that fits.

Glide-A-Side or mobile compactor

Glide-A-Side Sliding Cabinet Mechanical Mobile Compactor
Where it goes Against one wall in the office area A filing room with floor tracks
How it moves Front row slides sideways by hand Steering wheel, chain drive
Size 3, 5 or 7 bays, 856 mm deep 80 bays in an 8.5 × 5.0 m room (example plan)
Base loading 350 kg per bay 1000 kg per bay

Frequently asked questions

What is a Glide-A-Side sliding cabinet?

It is a filing system with two rows of steel shelving bays, one in front of the other. The back row is fixed and the front row slides sideways on a floor track, so you move a front bay aside to reach the bay behind it.

How does it save space?

On a 2745 mm wall, standard shelving fits 3 bays in one row. The Glide-A-Side fits 5 bays on the same wall, because a second row stands directly in front of the first with no aisle between them. That is 67% more filing on the same wall, in a total depth of 856 mm.

What sizes does it come in?

Two standard sizes: 2 static plus 1 movable bay at W 1830 × D 856 × H 2186 mm, and 3 static plus 2 movable bays at W 2745 × D 856 × H 2186 mm.

How much weight can it hold?

The base holds 350 kg per bay. Each shelf carries 65 kg as a uniformly distributed load as standard, and up to 100 kg on request.

How many arch files does it hold?

As a guide, about 55 three inch arch files per bay, so about 165 for the 3-bay size and about 275 for the 5-bay size.

Is it hard to move when full?

No. The front bays run on a solid steel track with special bearings and move smoothly even when fully loaded.

How is it different from a mobile compactor?

A mobile compactor fills a room with bays that open one aisle at a time. A Glide-A-Side stands against one wall, two rows deep, and suits an office area where room space is very limited.

Do you supply and install it in Malaysia?

Yes. Igreen Office Furniture Sdn. Bhd. supplies and installs the Glide-A-Side sliding cabinet in Malaysia. Send the wall length on WhatsApp for a quotation.

Arrange a quotation for the Glide-A-Side Sliding Cabinet on WhatsApp

Type

Processing...